Help fixing Fellow Ode 1.1 Grinder – keeps jamming after cleaning

Help fixing Fellow Ode 1.1 Grinder – keeps jamming after cleaning

Help fixing Fellow Ode 1.1 Grinder – keeps jamming after cleaning

Breaking New Ground: A Sicilian Coffee Plantation, Part 2

The Morettino family has successfully cultivated a coffee plantation right in Sicily. Next on the agenda: making the island an international coffee hub. BY JOSEPH PHELANSPECIAL TO BARISTA MAGAZINE ONLINE Feature photo by Tomas Anton Escobar via Unsplash Editor’s note: Check out part one of this story here. Andrea Morettino’s family has proven that coffee […]


Ethos Agriculture’s Journey from Vision to Impact in Coffee Sustainability: Part Two

In the second half of this article, we discover how the Coffee Barometer attempts to bridge the gap between discourse and action, envisioning a sustainable future for the coffee sector. BY VASILEIA FANARIOTISENIOR ONLINE CORRESPONDENT Featured photo courtesy of Rodrigo Flores via Unsplash As we embark on the second part of our conversation with Ethos […]


Oklahoma’s T3 Roasters Completes a Historic Opening

Oklahoma-based coffee company T3 Roasters has opened a flagship brick-and-mortar roastery and coffee bar called T3 Coffee Co., inside a thoroughly remodeled historic building in downtown Collinsville. The building is…


3 Elements Coffee: Supporting Veterans, One Cup at a Time  

The Australian roasting company helps to create opportunities for veteran communities.  BY VASILEIA FANARIOTISENIOR ONLINE CORRESPONDENT Photos courtesy of 3 Elements Coffee  Brisbane, Australia-based 3 Elements Coffee, founded by Navy veteran Terry McNally in 2016, has a mission to support the transition of ex-military personnel into the commercial workspace. To help achieve their goal and raise […]

Help fixing Fellow Ode 1.1 Grinder – keeps jamming after cleaning

Help fixing Fellow Ode 1.1 Grinder – keeps jamming after cleaning

minimum dose size?

I use the Hario switch to brew my coffee and am trying to reduce my caffeine consumption. Hence I would like to brew smaller cups of coffee. I am currently using 10g of coffee with 160g of water. (1:16 Ratio) I am wondering if there is a minimum amount of coffee...

Help fixing Fellow Ode 1.1 Grinder – keeps jamming after cleaning

Hi,

I tried to clean my Fellow Ode 1.1 Grinder and followed instructions as per Fellow. I took everything apart, cleaned the burrs and then put everything back together. I ran the grinder for 5 seconds with nothing in it and it seemed okay.

When I first tried to put beans back in, the grinder jammed. So I took everything apart, cleaned it and put it back together. Did a few checks, jammed again.

Now I have no clue what I did wrong. I've tried to play around with things. Now the dial seems to easily turn when it is on higher setting (5-11) but if I try and turn it to the finer side (5–>1), it becomes very stiff. I presume this is because the position of the dial is no longer calibrated with the actual grind setting of the grinder.

Furthermore – I have no clue if the actual grind setting is calibrated with the position of the dial. Last time I tried grinding before the latest jam (at level 7 for French press), the coffee was coming out extremely coarse.

Apologies if this isn't the right forum for machinery troubleshooting but I'm pretty sure a few people in this sub own this grinder!

Thanks!

submitted by /u/felolorocher
[link] [comments]

Shopping cart0
There are no products in the cart!
Continue shopping
0